Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2017 7:50:35 GMT -5
Hi, I've had my Unifi network running for a few weeks now with no issues (first Unifi network). I'm using a Unifi USG, have it connected to a Unifi 16 port switch (just installed a 2nd switch yesterday), and I have 2 of my 5 Unifi AP Pros up and running so far. I'm using one SSID for both the 2.4 & 5Ghz networks, but I only have the one SSID which covers both bands, but clients who can connect at higher rates on the 5Ghz band do so. The 2 APs are using the same SSID, as I mentioned, but different channels. I've lowered the power on one AP to reduce the overlap. I have a wireless network printer, which I used to be able to access from any device on the network, but since setting up these APs, it automatically connects to the secondary AP since it's closer to it, in the controller software, I can see the printer on the wireless network, but none of the clients that are hardwired to either one of the switches, or is connected via wireless to the primary AP. Thank you, For More Reference: product how to video
|
|